Ganga Rasayanie Private Limited
Garia, Kolkata, West Bengal
GST No. 19AAACG2051L1ZN
Call 08048972696 79% Response Rate
Dehydrated Coal Tar
Dehydrated Coal Tar
| Usage/Application | Industrial |
| Form | Liquid |
| Country of Origin | Made in India |
Features:
- Flammable
- Corrosive
- Dissoluble
View Complete details
Dehydrated Coal Tar GaroTAR
Applications
Suitable for Epoxy & Polyurethane
Marine & other High Build Coatings
Chloro-rubber formulation
Carbon Impregnation
Anti-corrosive coatings, Waterproofing & Primer
Guaranteed and Typical Specification of GaroTAR 22B – 2 (GaroTAR 62B-2 for Outside India)
Product |
|
| GaroTAR | ||
|
|
|
| 22B - 2 | |
|
|
|
|
|
|
|
|
| Guaranteed |
| Typical |
Density at 30C |
| 1.175 - 1.205 |
| 1.18 | |
|
|
|
| ||
Viscosity Poise at 20 C | 45 - 55 |
| 50 | ||
|
|
|
| ||
Moisture Content | < 0.5 |
| 0.1 | ||
|
|
|
| ||
Volatile Matter % 100C/2 hour | < 15 |
| TBR | ||
|
|
|
|
| |
Distillate upto | 200C | Max 6% |
| 1% | |
|
|
|
|
|
|
“ | “ | 300C | Max 25% |
| 22% |
“ | “ | 170C | Max 5% |
|
|
|
|
|
|
|
|
“ | “ | 170 - 270C | Max 10% |
|
|
|
|
|
|
|
|
“ | “ | 270- 300C | Max 10% |
|
|
|
|
|
|
| |
Ash content |
| <0.2 |
| 0.1 | |
|
|
|
| ||
Toluene Insoluble % | <13 |
| 11 | ||
Fineness of Grind (Microns) | Max 50 |
| 35 | ||
Specification:
1.Merged Specs sheet of Gaortar 22B-2 and Garotar 22-4.
2.Distillate upto 200C revised from 23% to 22% under typical
3.Distillate upto 200C revised from 5% to 6%; Distillates upto 300C revised from 30% max to 25% under Guaranteed
4.TI revised from max 15 to max 13
View Complete details
Dehydrated Coal Tar: GaroTAR 22
Applications
Marine and Under Chassis Coatings
Tar Epoxy and Polyurethane Based CoatingSteel Structure Protection
Water proofing and Construction Chemicals
Refractory Linings (Mudgun Mass / Taphole Clay)
Typical Specification of GaroTAR 22-O
Product | GaroTAR | |
GR 22-O | ||
|
| |
Density at 20C | 1.180 – 1.190 | |
|
| |
Viscosity (Poise) at 20 C | 30 - 40 | |
|
|
|
Viscosity in STV (4 mm cup) |
|
|
|
| |
Moisture Content % | < 0.1 | |
|
|
|
Volatile Matter % 100C/2 Hours | 6 | - 9 |
|
| |
Ash content % | 0.1 – 0.2 | |
Toluene Insoluble % | 9 - 11 | |
Flash Point C # | 105 | |
|
|
|
Distillate 0 - 170 deg C ( %) |
| 0 |
|
|
|
Distillate 170 - 270 deg C ( %) | 10 | - 14 |
Distillate 270 - 300 deg C ( %) | 10 | - 14 |
These are values indicated are typical values only representing the value in our laboratory with our test methods performed on representative sample and not on actual product supplied.
View Complete details
Dehydrated Coal Tar: GaroTAR GT5
Applications
Marine and Under Chassis Coatings
Tar Epoxy and Polyurethane Based Coating Steel Structure Protection
Water proofing and Construction Chemicals
Refractory Linings (Mudgun Mass / Taphole Clay)
Typical Specification of GaroTAR GT 05
Product | GaroTAR | |
GT 05 | ||
|
| |
Density at 20C | 1.155 – 1.170 | |
|
| |
Viscosity (Poise) at 20 C | 15 - 20 | |
|
|
|
Viscosity in STV (4 mm cup) |
|
|
|
| |
Moisture Content % | 0.1 | |
|
|
|
Volatile Matter % 100C/2 Hours | 15 | - 23 |
|
| |
Ash content % | 0.1 – 0.12 | |
Toluene Insoluble % | 10 | - 13 |
Flash Point C# | Min 30 | |
|
| |
Distillate 0 - 170 deg C ( %) | 8 - 12 | |
|
|
|
Distillate 170 - 270 deg C ( %) | 10 | - 12 |
Distillate 270 - 300 deg C ( %) | 6 | - 8 |
These are values indicated are typical values only representing the value in our laboratory with our test methods performed on representative sample and not on actual product supplied.
View Complete details
Dehydrated Coal Tar: GaroTAR
Applications
Suitable for Epoxy & Polyurethane
Marine & Other High Build Coatings
Chloro-rubber formulation
Carbon Impregnation
Anti-corrosive coatings, Waterproofing & Primer
Guaranteed and Typical Specification of GaroTAR 22C
Product |
| GaroTAR GR 22C |
| ||
|
|
|
|
|
|
|
|
| Specfication |
| Typical |
Density at 30C | 1.170 to 1.185 |
| TBR | ||
|
|
|
|
| |
Viscosity Poise | at 20 C | 20 - 35 |
| 25 | |
Moisture Content | < 0.1 |
| < 0.1 | ||
|
|
|
| ||
Volatile Matter % |
|
|
| ||
|
|
|
|
|
|
|
| 100C/2 hour | < 9 |
| 5 |
|
|
|
|
| |
Distillate upto | 170C | < 1% |
| 0 % | |
|
|
|
|
|
|
“ | “ | 170 - 270C | 6 to 10% |
| 8% |
|
|
|
|
|
|
“ | “ | 270- 300C | 7 to 12% |
| 9% |
|
|
|
|
| |
Ash content |
| 0.10 to 0.20 |
| TBR | |
|
|
|
| ||
Toluene Insoluble % | 8 to 12 |
| 10 | ||
Flash Point (deg C) | 110 to 120 |
| TBR | ||
The values indicated are typical values only representing the value in our laboratory with our test methods performed on representative sample and not on actual product supplied
Updates of Rev1 dt 03.10.2013:
Specification: 1. VM Content amended .
View Complete details
Dehydrated Coal Tar: GaroTAR 505S Grade 2
Applications
Marine and Under Chassis Coatings
Tar Epoxy and Polyurethane Based Coating
Steel Structure Protection
Water proofing and Construction Chemicals
Refractory Linings (Mudgun Mass / Taphole Clay)
Typical Specification of GaroTAR 505S (Grade 2) | ||
|
| |
Product | GaroTAR | |
505S – Grade 2 | ||
| ||
Density at 30C | 1.150 – 1.190 | |
|
| |
Viscosity B4 at 30 C | 140 – 180 Sec | |
|
| |
Moisture Content % | Max 0.3 | |
|
| |
Non Volatile Matter % 105C/3 | 70 - 80 | |
Hours | ||
| ||
Ash content % | Max 0.1 | |
|
| |
Toluene Insoluble % | Max 15 | |
|
| |
Flash Point C # | 65 | |
These are values indicated are typical values only representing the value in our laboratory with our test methods performed on representative sample and not on actual product supplied.
# - Not controlled parameter and not tested before shipment/supply. The readings are solely for indication and typical in nature
View Complete details
EXPLORE MORE CATEGORIES